|
| Info |
Message |
Trev Borg
North Yorks,
United Kingdom
Posts: 119
Speed Triple 955i (02-04)
05 Oct 2008 19:59 |
Will the adjustable kwaka levers fit the triple perch, or do i get the kwaka perch
if so which ones?
do they have a 10mm mirror thead?
am i just piss weak or does everyone else hurt after driving in traffic.
I can barely grip after ridind for a while.
Do i mod the actuator arm too ?
|
 |
| Advertisement |
|
|
Frank Jones
NY,
USA
Posts: 3,030
Premier Member
Sprint RS (02-05)
05 Oct 2008 20:39 |
Poof!!
Buy a Moto Guzzi or a 70's Trumpy........
|
|
Red Monkey
Swinging in a tyre,
United Kingdom
Posts: 19,257
Premier Member
Daytona 955i (99-01)
05 Oct 2008 20:52 |
I put a clutch assembly from a Zephyr on mine. Fits no problem, is cheap and is 4 way adjustable.
|
|
Butch
Mid Essex,
United Kingdom
Posts: 19
Speed Triple 955i (99-01)
06 Oct 2008 12:55 |
Clutch on mine is sweet and lovely. I had a new cable fitted when I bought it. I thought you could buy adjustable blades to fit the std perch anyway?
BTW - Guzzi clutches are also sweet and lovely. It's the throttle action on the bell cranked LM carbs that gives grief.
|
|
bradtx
Pearland, TX,
USA
Posts: 865
Premier Member
Daytona 955i (04->)
06 Oct 2008 13:08 |
Trev, Right after Ike came through all of the intersections became four way stops as there was no electricity and/or traffic signals. My left fore arm became like Popeye's after a few miles. I can tell you that if don't already have one and you get a dogleg clutch lever, you'll need a taller lever mount to get full travel.
Brad
|
|
Geordie Blackett
Burnley,
United Kingdom
Posts: 1,367
Premier Member
Daytona T595 (97-98)
06 Oct 2008 20:10 |
RM how did you get round the clutch switch
|
|
Red Monkey
Swinging in a tyre,
United Kingdom
Posts: 19,257
Premier Member
Daytona 955i (99-01)
06 Oct 2008 20:15 |
Straight swap. At the time it was a known mod.
|
|
jason thompson
australia,
Australia
Posts: 24
Premier Member
Daytona 955i (02CE, 03)
09 Oct 2008 01:52 |
disconect the clutch switch wires and loop it into itself
|
|
mick durbin
boulder colo./u.s.a.,
USA
Posts: 196
Daytona T595 (97-98)
12 Oct 2008 17:39 |
Trev ,
i have a set of Pazzo shorty leavers. they have 6 position adjustments. you just move a selector to 1-6 . they are not cheap..something like $175 u.s. but they work. look in mags like cycle rider or motorcycle in the back... they also come in different colors so you can match you paint .
|
|
Chris Line
Cowes,Isle of Wight.,
United Kingdom
Posts: 8,516
Premier Member
Speed Triple 955i (99-01)
17 Oct 2008 18:38 |
Yep, I fitted Pazzo's!
Guzzi clutches - easy!
Guzzy throttles- OK, not so easy but fitting lighter springs works?
But can jam open! (I put the OE ones back in)
|
|
